Infinitegra
Infinitegra, Inc.
Infinitegra

Compact Thermal Camera OWLIFT Type-A

July 1st, 2020 Notice

The end of sales. Thank you for loving the OWLIFT Type-A for five years.
And the OWLIFT Type-F is kept selling.

Specification

Compact Thermal Camera OWLIFT Type-A3
  • Resolution 80x60 pixels, Frame rate 8.6 fps, HFOV 51 deg.
  • USB2.0 (microUSB), UVC1.0
  • Size 42x22x13mm, Weight 10g
  • Required OS : Windows(10, 64bit), Linux(Linux Kernel or higher, 32bit/64bit, Vidoe4Linux2 is required), Android(4.0 or higher)
  • Wavelength from 8 to 14μm
  • Measurable Temperature Range from -5 to 130℃
    Operating environment or measuring objects might influence the measurable temperature range or the measuring accuracy. The accuracy is approx. ±3℃.
  • Thermal Sensitivity: 0.05℃ against a black body at 25℃
  • Acquirable Temperature Unit 0.01℃
Compact Thermal Camera OWLIFT
Apps, Libs (SDKs) are included!

The same as Type-F.

Option for water/dust-proof:
infrared-transparent insulation protection cover (GAT)

The OWLIFT doesn't support water/dust-proof. Expensive materials, e.g. germanium, are generally used for water/dust-proof, because typical materials, e.g. glass or acrylic, don't permeate infrared.

OWLIFT,MCS-M291A,GAT-05 Installation position requirement for OWLIFT and GAT-05
So we offer a special low cost cover GAT-05 (Link to Asahi Kasei Advance Corporation) that is able to permeate infrared/visible light and easy to cut, and software (currently only for Windows and Raspberry Pi) that supports GAT-05. As shown on the upper left figure, you can use it with a visible light camera(e.g. MCS-M291A).

We offer the GAT-05 with an affordable size (10cm x 10cm), and you can find the software for it in download site. Note that an installation position for the OWLIFT and the GAT-05 is required as shown on the upper right figure.

Notice

  • Nov. 28, 2019: The Type-A2 is discontinued, but the Type-A3 is distributed as the successor model. Its features are as the followings;
    • Basic features, e.g. a capability to measure temperature, are the same as the Type-A and Type-A2.
    • The only difference is the window size has been changed to small. Because of reducing image that GAT-05 reflects the OWLIFT's parts image from the window. The following left side picture is Type-A3 and right side is Type-A2.
      Difference of OWLIFT Type-A2/A3
  • Apr. 1, 2019: The Type-A is discontinued, but the Type-A2 is distributed as the successor model. Its features are as the followings;
    • Basic features, e.g. a capability to measure temperature, are the same as the Type-A.
    • Only the case body material is changed. The surface is slightly rougher than the Type-A.
    • Low price than the Type-A.
  • Please be reminded that operation with a USB repeater cable is not guaranteed.
  • Not allowed for military use.

Gallery

Color table = Rainbow, Temperature marker = ON

OWLIFT Sample Pictures: Portraits

OWLIFT Sample Pictures: Portraits

Color table = Rainbow, Temperature marker = ON

OWLIFT Sample Pictures: Elevator, Escalator, Building, Landscape

The demo movie taken by the OWLIFT

Rec/Play the RAW file (Details)


Connecting to the smart glass MOVERIO

OWLIFT MOVERIO BT-200

Infinitegra, Inc., All rights reserved.
Privacy Policies  |  Site Policies